UV DTF Tumbler Wrap, Fire Rose Waterproof Decal 6x3in Sticker 2Pc

Printed with UV-resistant inks for lasting color, this adhesive is supplied as a UV DTF tumbler wrap that adheres to smooth drinkware without a heat press. Sized approximately 6x3in and offered in rose and fire design art, the waterproof decal sticker resists scratches and uses outdoor-grade adhesive for stainless steel, glass, acrylic, and smooth plastics. Apply with firm pressure to avoid bubbling; no specialty tools are required, and the decal scales proportionally, so verify placement and measurements before ordering. A separate DTF fabric transfer version is ready-to-press for apparel graphic work and requires a heat press and proper peel timing.

* Size: approximate 6x3in width; height varies proportionally

* Surface compatibility: stainless steel tumblers, mugs, glass, acrylic, smooth plastics

* Material & finish: UV-resistant inks, waterproof vinyl art, scratch resistant

* Adhesive: outdoor-grade self-adhesive film for permanent mug art and glass can label

* Designs: rose print sticker and fire design art with a floral motif option

* Applications: cup decal, drinkware sticker, acrylic graphic, easy cup decor, DIY cup craft

* Apparel option: DTF fabric transfer (ready-to-press heat transfer art) — heat press required

How it works

The UV DTF decal is printed and finished for direct application to hard, non-porous surfaces so crafters can apply a cup decal or glass can label without specialty tools. Outdoor-grade adhesive and UV-resistant inks help the waterproof label retain color and resist scratches on everyday drinkware stickers and acrylic graphics. The DTF fabric transfer is supplied as a ready-to-press sheet for apparel graphic work and must be applied with a heat press following the transfer supplier’s time and temperature guidelines.

Application tips

Clean and dry the application surface thoroughly before applying the self-adhesive film; use rubbing alcohol and a lint-free cloth for best results. Align the decal, smooth from the center outward with firm, even pressure to remove bubbles, and trim excess if needed. For the DTF fabric transfer, preheat your heat press to the correct temperature for the garment, position the transfer, press with recommended pressure and time, then peel according to hot- or cold-peel instructions.

Compatibility and care

UV DTF decals perform best on smooth, non-porous surfaces: stainless steel tumblers, glass cans, acrylic, and smooth plastics. Avoid heavily textured or sharply contoured areas that can trap air and cause lifting. To extend the life of permanent mug art and apparel graphics, wash drinkware by hand when possible and launder garments inside out on a gentle cycle, avoiding high-heat drying and abrasive cleaners.

Sizing and placement

Each decal is produced to the width you select; the height changes proportionally based on artwork dimensions. Measure your tumbler or item carefully and confirm placement before ordering to ensure the rose print sticker or fire design art fits as expected. Product images and mockups are guidance only; slight color variation may occur between monitor and final print.

FAQ

Q: Can I use the UV DTF decal on a stainless steel tumbler?

A: Yes. The UV DTF decal adheres to hard, smooth surfaces like stainless steel tumblers and functions as a waterproof label and permanent mug art when applied to a clean, dry surface.

Q: Is the shirt transfer ready to press?

A: Yes. The DTF fabric transfer is a ready-to-press heat transfer art sheet intended for apparel graphic use only and requires a heat press; garments are not included.

Q: Are these decals waterproof and scratch resistant?

A: The UV DTF decal is printed with UV-resistant inks and finished as waterproof vinyl art that is scratch resistant for everyday use on drinkware stickers and acrylic graphics.

Q: Which designs are available and how do I pick a size?

A: Design options include a floral motif and fire design art—rose print sticker and fire design art examples are shown in photos. Choose the approximate width that matches your item; height scales proportionally. Verify measurements before ordering for a proper glass can label or cup decal fit.